Actually it's very easy and simple, but you must read carefully any informations from tplink, ddwrt forum, and any sources to avoid bricking your router.
WARNING:It is VERY important that you do not interrupt the setup while the router is being flashed and rebooted. Do not turn off the computer, close the web browser, or turn off the router during this process!
1. Please visit here to find supported devices
2. Download here to find .bin file (Please choose factory-to-ddwrt, if your router has factory default firmware)
3. From web-base configurations, please reset to factory default (System Tools->Default)
4. Browse .bin file, klik upgrage, OK (System Tools->Upgrade)
5. Just wait for 2 minutes.
6. Change username and password
If you want to revert to original firmware please visit: here
Source: tplink, ddwrt
No comments:
Post a Comment