This is access point + router TP-Link TL WR841ND . There is power ON/OFF button in back side. 1 WAN port, 4 LAN port. Web interface so simple. Default IP setting 192.168.1.1, with username and password: admin.
For security reason, don't forget change username and password immediately and setting wireless security. Sometimes, you must switch of wireless security WPA or WPA2, if one of them doesn't support your wifi devices, ex: iphone (chinesse) or my old benq notebook, need to be WPA rather than WPA2.
Until now this ap+router still working properly for 24 hours for 2 months. This ap+router also can be upgrade from 3rd party firmware such as ddwrt with more rich contents.
Source: TP-Link, ddwrt
For security reason, don't forget change username and password immediately and setting wireless security. Sometimes, you must switch of wireless security WPA or WPA2, if one of them doesn't support your wifi devices, ex: iphone (chinesse) or my old benq notebook, need to be WPA rather than WPA2.
Until now this ap+router still working properly for 24 hours for 2 months. This ap+router also can be upgrade from 3rd party firmware such as ddwrt with more rich contents.
Source: TP-Link, ddwrt
No comments:
Post a Comment